whereas traditional actuators on poppet style gas can achieve around 2-3x base spring pressure

Ride height is designed to be ~80mm from front subframe to ground and rear according to front

Ride height is designed to be ~80mm from front subframe to ground

Caster alone is not enough to ensure sufficient self-alignment torque

This kit requires sourcing and using the Corvette C4 inner tie rods (OE part number: 21011026)

Concaver CVR5 20x8 ET20-40 BLANK Custom Finish CB: 72,6 JR12 whereas traditional actuators on poppetPCD: 5x108, 5x110, 5x112, 5x114. 3, 5x115, 5x118, 5x120, 5x127, 5x130 ET: 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40