The motor is controlled by a frequency converter and protected by Pt100 sensors

They are installed at the lower end of the suction hose and consist of strainer (mesh size 0

2 m PVC deaeration hose (4/6 mm)

Profinet and Ethernet IP via CIM/CIU models)

The pump is fitted with a 1

sp 3a 33 10001933 The motor is controlled bySubmersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1. 4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 2. 2 kW MS402 motor with sand shield, lip seal, water lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type submersible motor