The bolt should be locked with locking fluid during installation

If you want to remove the display

320 NeraUnlike the original

We recommend that you install the spring side from the wheel and lubricate the seal with grease when installing

On these machines there are two sealing strips if you unscrew the chassis halves

Gummidämpare till främre lyftsensor (original) Plastic gears Husqvarna Autompwer 320-550 The bolt should be lockedGenuine rubber damper for the front lift sensor, made in Sweden. Identical to the one found on the lift sensor sold by Husqvarna. It features grooves on the metal insert to prevent rotation when tightening the screws to the chassis. Fits both the top and bottom positions. If you do not want to purchase an entire lift sensor simply because the rubber has failed, this damper is the perfect solution. Note: This is not a complete lift sensor, but a